Blue Bunny Voltage Step Up for Super Buddy Satellite Meter

With this voltage upgrade you can easily align WildBlue and Telesat / Anikast / Xplornet antennas without connecting to the modem! Get your dish pointed before you have to start running any modem cables and doing your provisioning. This gives you the ability to power the TRIA with your Super Buddy or Sat Buddy meter.

For use with the following systems:

• WildBlue
• Telesat/Anikast/Xplornet

Features include:

• Power the WildBlue and Anikast/Xplornet/Telesat TRIA with your satellite meter
• Weather Resistant and Rugged durable aluminum case with rubber gaskets

Applications:

• WildBlue & Telesat/Anikast/Xplornet Installations
• Site surveys
• Commercial installations
• Single family home installations
• Multiple dwelling unit (apartment and condominium) system installations and alignments

Specifications:

• Enclosure: Aluminum with rubber gasket sealed end panels
• Size (L x W x D): 2.8" x 2.8" x 1.3" - (7.1 cm x 7.1 cm x 3.3 cm)
• Weight: 0.6 lbs. (0.27 kg)
• Connector Style: F-female
• Temperature Range: 0° to 125° F (-18° to 52° C)
• Input Voltage: from sat meter, 13 to 18 VDC
• Input Current: 600 mA maximum @ 13V
• Output Voltage: Tx port 32 VDC, Rx port 26 VDC
• Cable Length: Recommend short jumper, 100' max, RG-6
• Output Current: 150 mA max (combined both ports)
• Passes RF Signals: 950-2150 MHz, -60 to 0 dBm
• Insertion Loss: 0.4 dB (974 MHz), 1.1 dB (1563 MHz)
• Return Loss: 10 dB (typical)
• Impedance: 75 Ohm
• Warranty: 12 month limited

NOTE: The Blue Bunny Voltage Step Up is only compatible with WildBlue TRIAs manufactured by UMA in Taiwan. Please check the tag located on the bottom of your TRIA to see if it’s compatible with the Blue Bunny Voltage Step Up. If it says "Made in Taiwan by UMA", then it is compatible. If it says "Made in Korea by Ko Space", then it is NOT compatible