Dish Network Dish 1000 Plus Antenna w/ DPP-44 Multiswitch

Dish Network Dish 1000 Plus Antenna with DPP-44 multiswitch

Assembly includes:
(1) DPP44 Switch (DPP44) to connect the four LNBF output ports to a DPP44 Switch
(1) Dish Pro Dual Output LNB(101001)
(1) Mast & Struts
(1) Mount
(1) Dish Network Dish 1000 Plus Antenna - which allows reception of programming from three orbital locations; 110, 119, and 129 using a dish antenna size similar to DISH 500+.

Dimensions:
1 5/8" mounting mast
23.8"h x 30.9"w dish face

Standard Configuration:
DISH 1000+ includes a DP Dual Band LNBF and two DP Dual LNBF. A DPP 44 switch must be used in all DISH 1000+ installations (up to 4 DPP receivers).
DP Dual Band LNBF for orbital locations; 118.7, 119
DP Dual LNBF for orbital location 129 and 110,

Models 2800, 6000, and 721 may display the 118.7 orbital locations in the Point Dish and Installation Summery screens as 119K. Others will display the 118.7 orbital locations as "118" in these screens.

* All DISH 1000+ antennas will need to be installed with a DPP 44 switch.

Receivers NOT compatible with DISH 1000+: (*no 129/118.7 support) 1000, 2000, 3000, 4000, 5000, JVC-IRR, DISHPlayer 7100/7200

International Services Moving to 118.7 Orbital Slot DISH Network will begin broadcasting the following International languages from the 118.7 orbital location. This new orbital location will be viewed with a DISH 500+ (which also includes 110/119) or with a DISH 1000+ (including 110/119/129).