KBOX K-1 Heros FTA Receiver has an ethernet and a USB port.
Main Processor Conexant Virgo (32-bit RISC CPU 180 MIPS)
- 2 MB Flash ROM
- Memory 32 MB SDRAM
- Input Connector F-type, IEC 169-24, Female
- Loop Out F-type, IEC 169-24, Female
- Frequency Range 950 MHz ~ 2150 MHz
- Input Impedance 75 Ohm, unbalanced
- Signal Level ~65 to -25 dBm
- LNB Power 13/18 VDC, max. 400 mA
- 22KHz Tone (22Ўѕ2) KHz, (0.6Ўѕ2) V
- DiSEqC Control Versions 1.0, 1.1, 1.2, USALS
- Demodulation QPSK
- Input Symbol Rate 2 ~ 45 Ms/s
- FEC Decoder 1/2, 2/3, 3/4, 5/6, and 7/8 with constraint length K=7
- Transport Stream MPEG2 ISO/IEC 13818
- Profile Level MPEG2 MP@ML
- Input Rate Max. 15 Mbit/s
- Video Formats 4:3 Letterbox, 4:3 Pan & Scan, 16:9
- Video Resolution 720 x 576, 720 x 480
- Audio Decoding MPEG / MusiCam Layer 1 & 2
- Audio Mode Stereo/Joint Stereo/Mono
- Sampling Rate 32 Khz, 44.1 KHz, 48 Khz
- Slots 1 x USB Host
- Buttons 3 x Buttons (CH UP/DOWN, STANDBY)
- Display 7-segment (Channel No. or Time)
- Indicators 2 LEDs (STANDBY, REMOTE)
- RF Connector IEC 169-24, Female
- Frequency CH 3: 61.25 MHz; CH 4: 67.25 MHz
- Output Channel CH 3 / CH 4
- TV Standard NTSC-M
- Preset Channel CH 3
- Software changeable by Menu
- Video Composite video (RCA)
- S-VHS video (Mini-DIN)
- Component Y/Pb/Pr video (RGB)
- RCA Stereo; Audio L/R AC-3 Dolby Digital (Optical and Coaxial)
- RS-232C 9-pin D-SUB (male) type
- 115 Kbps transfer rate
- USB USB 2.0 Host support
- Input Voltage AC 100 ~ 250 V, 50/60 Hz
- Type SMPS
- Power Consum. Max. 20 W
- Standby Power Max. 8 W
- Protection Separate internal fuse and lightning protection
This product was added to our catalog on Tuesday 20 May, 2008.