Kits includes (1) AcutracPRO Satellite Signal Meter and (1) DIGIAIR Pro Off-Air Terrestrial TV Antenna Signal Meter
ACUTRAC 22 PRO SATELLITE METER SPECIFICATIONS - Most popular signal meter model
- Works with DIRECTV and Dish Network
- Powered by internal 8.4 NiMH battery or from satellite recevier through coax cable. 30 minute operation on fully charged battery
- Does not need the receiver to work
- Kit comes with AcutracPRO, (2) 6-foot coax jumper cables, a 18V wall charger, a 12V vehicle cord power adapter/charger, and a protective leather case
- Input Frequency Range: 900-2200 MHz
- Input Level: 20-100 dByV
- Overload Protection: 600mA LNBF current draw limiter - meter will indicate "Over Current"
- Works with DISH PRO and SUPERDISH satellite systems
The ACUTRAC22 Pro is designed to be an aid in aligning satellite antenna so they can provide maximum performance. Please be aware of the fact that there are numerous satellites which will cause the ACUTRAC22 Pro to respond with a signal reading. The installer must select the correct satellite(s) for alignment. The software provided with the satellite receiver can provide the elevation and azimuth of the satellite(s) if desired.
Uses: - DIRECWAY systems
- DIRECTV PARA TODOS
- Multi-Satellite installs: 101, 110, and 119
- DISH PRO and SUPERDISH
Features: - Easy to read LCD display
- Self-contained rechargeable battery
- Dual satellite signal
- Selectable audio on/off tone measures receiver voltage
- Measures individual LNBF current consumption
- Switches 22 KHz on/off
- Adjustable LCD contrast
- Tests coax cable runs
- AC charger
- DC charger
- 13/18 volt switching
DIGIAIR PRO TV SIGNAL METER SPECIFICATIONS - Easy to use with compact design
- Developed for exact adjustment and alignment of terrestrial antennas (off-air)
- LCD display for signal strength in form of thermometer scales and number 0-99
- Digiair shows a single channel or six channels at the same time. You can view signal in spectrum mode
- You can feed voltage (5 Volt) to external active-amplified antennas. Short-circuit protection by automatic fuse
- Charged via External DC Power source of 14-20 volts
Specifications - Input Frequency: 47-862MHz
- Input Level: 25-100dBuV
- Input Impedence: 75 Ohm, F-connectors
- Short-Circuit Protection: Automatic fuse on antenna input
- Indications: Antenna voltage 5V on/off
- Power Supply: External DC Power supply 12-18V (Center-pin+)
- Power Consumption: Ca 230 mA
- Display: 128x64 Pixels (LCD)
- Battery: 600 mAh 8.4 V
- Weight: 0.3 Kg, 0.66 lbs
- Dimensions: 1234 x 55 x 35 mm
- Includes Carrying Case, Power Supply, and Car Charger
Measuring Method - Signal presentation on LCD screen display in form of thermometer-scales. Spectrum display or three digit number. Pitch tone indication on built-in loudspeaker.
- Signal Level Readout
- Thermometer scales showing maxhold & current signal level. Three digit number showing highest value when measuring on a single channel. Highest tone on loudspeaker. Max-hold function.
This product was added to our catalog on Monday 18 January, 2010.
