If you have snow on your satellie dish the best way to keep keep it off is with the hot shot dish heater. For severe weather conditions. This Kit is for severe weather conditions and includes Armguard Heater Arm Element Add On. Includes Armguard Heater Arm Element Add

200 Watt Hot Shot Satellite Heater Kit w Armguard is a heated snow cover for your satellite dish. It is applied to both Dish Network and Directv along with other commercial grade dishes. The Hotshot satellite dish warmer keeps the temperature of your dish from 38 to 52 degrees F.

The Hot Shot Heater Sticker is 20"x28" so for a dish network dish there will be a little bit over overage so its recommended to just slightly bending the excess over. This kit also includes armguard which melts the snow off of the lnb support arm and is recommended for severe conditions. The low-voltage antenna heater attaches to your satellite dish. It reduces or eliminates signal interference from snow and ice. It comes in an easy-to-install kit form.

Designed for Directv Slimline antennas but used on reflectors similar in shape. The HotShot heating element has an automatic thermostat that turns on just above freezing temperatures and off when the dish surface heats up. Offering for over 20 years and used by many thousands of dish owners in snowy climates to aid reception when the weather gets testy. This blanket is designed to be powered by the Perfect Vision HotShot 200 Watt Switching Power Supply.

Includes:

Perfect Vision HotShot 200 Watt Switching Power Supply and 100 ft Cable Assembly (HSPSKIT4)

- Designed to provide power to both the HotShot 28”x20” Heating Element (PVHSSL) and the HotShot Arm Heater 14”x1.5” (HSARM)
- This power supply provides 24 volts of AC power to the blanket and that power should NOT be exceeded.

Perfect Vision HotShot 28”x20” Satellite Dish Heating Element Sticker (PVHSSL)

- Automatic thermostat turns "on" just above freezing at 49 degrees fahrenheit +/10 degree and close at 70 degrees +/5 degree
- Durable Vinyl Material
- Etched foil resistance heating element
- Conforms to the reflectors curves and angles
- Can be installed on the front of the dish or the back
- Multiple heat zones apply the maximum heat where it’s needed most
- 3M Acrylic adhesive assures a tight bond to the antenna.
- Easy to Install
- Works fine on the following Satellite Dishes
  - Directv Slimline
  - Directv AT9
  - Directv 66E (International)
  - .74Raven (Steel) Hughesnet
  - .74 Prodelin (Steel) Hughesnet
  - Exede Dish
  - *Blanket fits on Front or Back of Slimline and .74 Prodelin Steel

HotShot Satellite Dish Heater Arm Peel and Stick Add On 1.5"x 14" (HS14ARM)

- Connects to the Perfect Vision HotShot 28”x20” Satellite Dish Heating Element Sticker (PVHSSL)
- Self-adhesive
- Plugs directly into the “Accessory” plug of the HotShot heater blanket
- UV resistant
- Switches on/off in parallel with the HotShot heater thermostat sensor
- Uses the Perfect Vision HotShot 200 Watt Switching Power Supply and 100 ft Cable Assembly (HSPSKIT4)