Shopping Cart

Your Shopping Cart is empty.













Satellite Dish Mounts





CommdeckwLClips
RTSC

Commdeck Non Penetrating Roof Mount w L-Style Strut Clips (1 Pair)

This mount consist of the Commdeck Roof Mount plus a Pair of L Style Support Clipps.  If you have the Slimline Satellite Dish, The Dish Network 1000.2 or 1000.4 you will need these Clips.   If you've wanted to install a satellite dish but have avoided doing so because of the unsightly appearance of the cords on the house, as well as...

$79.99

Add:




Commdeck
RTSC

Commdeck Satellite Dish Roof Mount

If you've wanted to install a satellite dish but have avoided doing so because of the unsightly appearance of the cords on the house, as well as because of the inherent damage done to the roof, you can now rest easily. The CommDeck is a communications and satellite dish mounting system that provides a weather-tight dish-mounting platform designed...

$59.99

Add:




LOPROMNT
Directv

Directv Slimline Dish Low Profile Roof Mount

The LOPROMNT is the low-profile mount for the DIRECTV™ Slimline satellite dish.

$24.99  $19.99

Add:




POLE158-6FT
Perfect Vision

Dish Network Satellite Pole Mount 1 5/8" OD, 72" Long

This 6’ satellite mounting pole/antenna mast is made of 16 gauge galvanized pipe and has a 1 5/8” outside diameter.   Will fit all Dish Network Satellite Dishes.

$24.99

Add:




EMV-4
Perfect Vision

Eave Mount Products, Under Eave Mount

These are the product's dimensions: Each 15.50 in. wide x 1.75 in. high x 24.00 in. deep Volume: 651.00 cubic in. Weight: 6.30 lbs.

$69.99

Add:




PVTP3U
Perfect Vision

Satellite Tripod Mount 3', Universal 2"' and 1 5/8" Pole

The PVTP3U is a heavy-duty tripod used to mount satellite antennas or off-air antennas. It is super sturdy, made of 18 gauge steel. The 3’ tripod includes a  28” long center universal support pole which is 2.0" O.D. on one end and 1 5/8" O.D. on the other end.

$49.99  $49.99

Add:




6110063-04


SKYWARE GLOBAL NPRM Model 6110063-04 1.2 m Non-Penetrating Roof Mount

73 mm (2.88”) O.D. mast and a 1.6 m x 1.6 m (63” x 63”) base when assembled The SKYWARE GLOBAL 6110063-04 commercial non-penetrating roof mount has been specifically designed for our line of antennas from 96 cm to 1.2 m. Mechanically tested and field proven, this mount provides the performance necessary for demanding transmit applications....

$379.99

Add:




DTVJMount
Directv

Directv J-Mount Mast For Slimline Dish

DIRECTV J-Mount 2" Inch OD for AT9 AU9S Dish DTVAT with Mounting Hardware Antenna Dish Satellite Offset Mast Universal J Pipe Mount 28" Support SUPERDMOUNT for Large HD TV Antenna UHF/VHF/FM

$19.99

Add:




JMountES9675
Dish Network

Dish Network J-Mount for TV Antenna or Satellite Dish Antenna - 1.66 inch mast (JMOUNT)

  24" length1.66" J Mount.  Buy 10 or More and Save.  Can also be used for Off Air, Wifi , and various applications.   Universal mount for Dish 500 Antennas. Universal "J" pipe wall or roof mount 24" length1.66" pipe Foot Print is 7" X 4" Standard hole pattern on base for...

$14.99

Add:




SLMTUEP
Perfect Vision

Directv Under Eave Mount For Slimline HD Dish w Braces

For installing a satellite or antenna under the eave of your roof.

$49.99

Add:




DTVJMTwLSB
Directv

Directv J-Mount Mast For Slimline Dish with Long and Short Brace

 J-Mount Mast For Slimline Dish with Long and Short Brace

$29.99

Add:




POLE2-6FT
Directv

Directv Satellite Pole Mount 2" OD, 72" Long(16 GA)

This 6’ satellite mounting pole/antenna mast is made of 16 gauge galvanized pipe and has a 2” outside diameter.  Fits all Directv Antenna Styles.

$24.99

Add:




NPR6B
Perfect Vision

Perfect Vision NPR6B Non-Penetrating 1.75 and 2 in. Mast NPR-6B

This adjustable, non-penetrating roof mount is designed for the slim line and the international dish. The mast will adjust from 1 & ¾” to 2”, the installer simply selects the diameter when assembling the frame. No holes need to be drilled in the roof surface, this avoids reluctance by building owners and reduces the possibly...

$64.99

Add:




NPR8
Perfect Vision

Perfect Vision NPR8 Non-Penetrating Flat-Roof Mount (NPR-8)

A variety of hole patterns are pre-punched in this base frame. You can drill the center plate area if necessary to fit other antenna foot patterns.  No holes need to be drilled in the roof surface, this avoids reluctance by building owners and reduces the possibility of roof leaks. The total weight of the assembly can be varied by the use of...

$59.99

Add:




NPR5
Perfect Vision

Non Penetrating Roof Mount For 18" & 24" Satellite Dishes

This non-penetrating roof mount is designed for to fit both 18” and 24” dishes. No holes need to be drilled in the roof surface, this avoids reluctance by building owners and reduces the possibly of roof leaks. The total weight of the assembly can be varied by the use of either “light” concrete blocks or standard weight...

$39.99

Add:




NPRMAT8
Perfect Vision

Roof Mat for NPR Flat Roof Mounts, 37.9" x 35.375"(Fits NPR6 & NPR8)

These pads are designed to be used under non-penetrating roof (NPR) mounts like our NPR6B and NPR8 . No holes need to be drilled in the roof surface with those mount designs but a pad should be used under the frame to provide a small buffer between the metal angle and the roof coating. Use of a pad can avoid reluctance by building owners and...

$24.99

Add:




RETRODECK
RTSC

Retrodeck Dish Mounting System ( NO LAG BOLTS REQUIRED)

The Retrodeck is used to mount a satellite dish/antenna when re-roofing homes or can be used for new installations. Unlike the Commdeck the Retrodeck does not house the cable. Uses Remount existing dish or antenna without lag bolt penetration through new roofing material New dish/antenna installations where cables are not pre-wired through the...

$49.99  $44.99

Add:




DTVAHNONPEN
Directv

Directv Non Penetrating Roof Mount For Alaska and Hawaii Dish

This non-penetrating roof mount is specifically designed to be used with the DIRECTV™ 1.2M satellite dish which is required in Alaska and Hawaii to receive DIRECTV™ satellite signals. No holes need to be drilled in the roof surface, this avoids reluctance by building owners and reduces the possibly of roof leaks. The total weight of the...

$179.99

Add:




PVWB4
Perfect Vision

Perfect Vision PVWB4 4" W-Type Wall Mount (PVWB4 )

Attach antenna mast (1.25 dia.) to the side of houses or other structures.   • Attach VHF Antenna mast (1.25” dia.) to the side   of houses or other structures • W-type wall mount • Mount off-air antennas from side of structure • For mast size of 1.25” diameter   PDF

$19.99

Add:




strclp
RTSC

Commdeck and Retrodeck L-Style Strut Clip - One Pair

Alll Directv and Dish Network dishes require support braces.  You will need these if you get either the Retrodeck or Commdeck Roof mounting systems.   We do have bundled kits also available. var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-25120912-1']); _gaq.push(['_trackPageview']); (function() { var ga =...

$29.99

Add:




commtile
RTSC

Commdeck CommTile Tile Roof Dish Mounting System

All the great benefits of the commdeck, but made specifically for tile. Commtile has a 6" collar to allow for tile height and a 30" x 30" aluminum flashing that forms to any type of roof tile.   Pre-wire your new home for future dish/antenna use Mount antennas with out using a tripod Supports dishes 18"-36" offering exceptional strength...

$117.36

Add:




DECK ADAPTER
RTSC

Deck Adapter Antenna Mounting Kit ( NO LAG BOLTS REQUIRED)

The antenna mounting kit is designed to support standard 11/4- 11/2 off-air antennas when mounting to a Commdeck or RetroDeck. Uses To mount various off-air antennas to a Commdeck or RetroDeck mounting system Benefits and Features Provides a damage free antenna installation Eliminates the need for a tripod Adjusts to any roof slope Removes...

$19.99

Add: