Traxis DBS-1500 FTA Complete Satellite System

System Includes a Hot Dish 75 or Equivalent Substitute, and a Single KU LNB along with the Traxis DBS-1500 FTA Satellite Receiver. Receiver Specs are as follows:

Technical Specifications DVB, MPEG2
LNB / Tuner input
Connector 1 x "F"-type
RF input frequency 950~2150MHz
RF input power level -20~-65 dBm
Supply voltage 13/18 V ± 5%
Max. current 500mA, overload protected
Control voltage 22KHz, 0.65 Vpp
DiSEqC Tone burst A/B or Level 1.2
RF impedance 75 ohm
Video
Connector 1 x RCA
Audio
Connector 2 x RCA ( R+L )
Output 0.5 Vrms ± 0.5 dB / RL 10 k ohm
Serial (RS232) serial data
Connector 9-pin D-sub male
Signals RS232, max. 115.2 kbit/s
Pin out
1 DCD (Data carrier detect) not connected
2 RXD (receive data)
3 TXD (Transmit data)
4 DTR (Data terminal ready) Set to high
5 GND (Signal ground)
6 DSR (Data set ready) not connected
7 RTS (Ready to send)
8 CTS (Clear to send)
9 RI (Ring indicator) not connected
Other Data
Supply voltage 110~240V AC, 47~63Hz
Power consumption max. 20W at 500mA LNB load
Power consumption in standby 5W
Operating temperature +5ºC to +40ºC
Storage temperature -40ºC to +65ºC
Humidity 25 to 90% rel humidity
Operating distance for remote control max. 10 meters
Dimensions ( w x d x h) 295 x 210 x 40 mm
Weight 2000 g approximate