1.66"od to V1 Starlink Pipe Adapter

1 5/8" OD to Starlink Pipe Adapter for V1 Round Starlink Dish

This Starlink Pipe Adapter allows you to install a V1 Round dish on an existing 1 5/8" mast in 10 minutes with a very tight fitting adapter from both ends.

The

Powder coating finish provides protection from the elements but is also a very beautiful black "Satin" finish similar to the 12" Starlink mast.

For a Starlink Pole Mount we recommend going to home depot and buying a 1 5/8' OD 72" galvanized fence pole for under $15.00.   Be sure to get a bag of Quickcrete.   Once the pole is set just place this on the pole in under 5 minutes.

If  you have a pre existing Dish Network Mount just use the same mount and place this over it.  If  you want a j mount we have numerous models that will fit the bill.

Slide pipe adapter onto existing pipe / pole / mast. Tighten Bolts. Check to make sure the adapter is level in two perpendicular directions. Do not over tighten bolts.

Features:

• Tight Fitting 6/100" Gap on the starlink side, 3/100" on the 1 5/8" side.
• Converts any 1 5/8" pipe to Starlink V1 in Under 5 minutes
• Powder Coated / Charcoal Grey Gloss
• Weight: 1.5 lbs.
• Ships FAST and Inexpensively.   USPS 2-3 day priority is less than $10 in most parts of the country.   Fedex ground is guaranteed in two days.